Configuration and Normalization for Soiling, Bifacial Gain, and Other Multi-Unit Performance Index Applications
Two or More RDE300i Units - 880096-01
Systems with two or more RDE300i units can be used for measuring soiling losses or bifacial gain. Follower modules are compared with a Leader module which serves as a reference for the RDE300i Leader to calculate a Performance Index for each module. For example, the power output of a soiled Follower could be compared with the output of a clean Leader.
We designate these system types as "Module-Module".
To configure and normalize systems with two or more RDE300i units, follow instructions in document 880096-01, "Configuration and Normalization Guide for Multi-RDE300i Systems," available via the link at the bottom of this page.
RDE300i With Mars and/or RC22 - 880096-02
Incorporating Mars and RC22 in a system with RDE300i can allow for automated measurement of module Performance Index values. When Mars is used, manual cleaning can be eliminated.
We designate these system types as "Module-Cell" or "Module-Cell-Optical".
Instructions for integrating Mars and/or RC22 with RDE300i are provided in document 880096-02, "Configuration and Normalization Guide for RDE300i with Mars and RC22", available via the link at the bottom of this page.
Related Documents
- User Guide: For instructions on installing and configuring RDE300i, see document 880093, RDE300i User Guide.
- Ordering Guide: For additional information on RDE300i system options for soiling measurement, including use of multiple RDE300i systems and/or combinations of RDE300i with Mars and/or RC22, see document 880100, Soiling Measurement Products Ordering Guide, which includes system descriptions and cabling options.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article