RDE300i Configuration Manager Software
Overview
RDE300i Configuration Manager Software (500092) allows you to configure, test, and normalize your RDE300i units. The software runs on a Windows PC or laptop.
Version History:
Version Number | Release Date | Release Notes |
R6661 | 2024-01-12 | - Improved advanced settings dialog and help screen
- Improved configuration options dialog
- Added rear irradiance uniformity threshold
- Added event queue viewer for troubleshooting and support
|
R6619 | 2023-11-08 | - Added more detailed Help information for Advanced settings dialog
- Added support to display event code 8 for firmware R6611 and higher
|
R6573 | 2023-09-28 | - Added features to improve reliability of firmware update process
- Added user-settable irradiance threshold for soiling analysis
- Added features for integration with Mars Soiling Sensor
- Modified Advanced Configuration screen to better guide user selections
- Added Help button on Support tab
- Fixed a bug in the export data progress bar
|
R6501 | 2023-07-21 | - Added support for integrating Mars and RC22 with RDE300i
- Added support for up to 4 RDE300i Follower units
- Added Event Code to Help screen
- Requires RDE300i Firmware R6492 or higher
|
R6426 | 2023-04-13 | - Fixed bug on advanced settings configuration
|
R6422 | 2023-04-12 | - Supports IV parameter rapid update configuration
- Improved performance index normalization
- Automatically checks for software updates
- Requires RDE300i Firmware R6425 or higher
|
R6365 | 2023-04-05 | |
Installing the software:
- Download the 500092 installer .msi file from the link below
- Run the .msi installer
RDE300i Firmware
Overview
RDE300i Firmware (500108) is the software that runs directly on your RDE300i unit.
Version History:
Version Number | Release Date | Release Notes |
R6678 | 2024-02-14 | - Added support for new hardware revision with component substitution
|
R6654 | 2024-01-12 | - Added rear-side irradiance uniformity filter for performance index
- Added event code for cool-down time between high power IV sweeps
- Fixed minor bugs
|
R6611 | 2023-11-08 | - Fixed a bug that prevented reporting Isc or Irradiance at low Isc values
- Improved IV sweep capability for low Isc
- Improved IV update rate: parameters now update up to once per 1 second
- Added a feature to automatically attempt restart after internal communication error
- Improved sweep logic so Isc and Voc are always obtained, even at low currents
- Added event code 8 for internal communication error
- Improved consistency of Pmax/Isc reporting in different operating modes
- Fixed a bug that could cause missed Pmax mini sweeps at low current
- Fixed a bug that could cause some Follower registers to be reset incorrectly after a communication error
|
R6569 | 2023-09-28 | - Added features for integrating Mars Soiling Sensor
- Added features to prevent need for external user restarts
- Improved communication with AUX devices
|
R6492 | 2023-07-21 | - Added support for integrating Mars and RC22 with RDE300i
- Added support for up to 4 RDE300i Follower units
- Fixed a bug that could cause missed communication attempts
- Improved filtering of measurement results
- Requires RDE300i Configuration Manager R6501 or higher
|
R6427 | 2023-04-13 | - Fixed bug affecting RTD temperature sensor startup
|
R6425 | 2023-04-12 | - IV parameter rapid update
- Improved performance index normalization
- Requires RDE300i Configuration Manager R6422 or higher
|
R6368 | 2023-04-01 | |
Installing the software: