RDE300i
For testing and troubleshooting Modbus communication on RDE300i, please use document 880098, available at the link below.
Mon, 1 May, 2023 at 6:06 PM
Our CE and ROHS Declaration of Conformity for the RDE300i product may be downloaded from the link at the bottom of this page.
Tue, 16 May, 2023 at 10:26 AM
Are you using Campbell Scientific data loggers to retrieve data from the RDE300i? To help you get started with your data logger coding more quickly, we ...
Wed, 6 Mar, 2024 at 8:53 PM
On the RDE300i Configuration Manager Software, the Support tab contains an "Export Support File" button, as shown below. The Support File cont...
Mon, 11 Sep, 2023 at 11:17 AM
By using RDE300i to measure total effective irradiance with a reference module, users can automatically determine equivalent irradiance values that are spec...
Tue, 7 Nov, 2023 at 2:34 PM
RDE300i has a weight less of approximately 3.1 kg (6.8 lbs) when including standard length module and RTD cables. The above specification is a maximum ...
Wed, 24 Jan, 2024 at 2:28 PM
A potential problem that could cause RDE300i firmware loading to be unsuccessful (issue A101-57) was solved in RDE300i Configuration Manager R6880, released...
Fri, 24 May, 2024 at 10:08 AM
A potential problem that could cause RDE300i firmware loading to be unsuccessful (issue A101-58) was solved in RDE300i Configuration Manager R6880, released...
Fri, 24 May, 2024 at 2:33 PM
The RDE300i Status LED indicates various states as shown in the table below. State Blink Pattern Notes Off Off Unit is not powered. Normal Slow B...
Thu, 23 May, 2024 at 4:58 PM
RDE300i may display Event Code 8, Event Code 9, or Event Code 2 following an internal communication error, resulting in an overall Status 2 error condition....
Tue, 13 Aug, 2024 at 4:41 PM