Overvivew
For information on the 810297 RTD kit with the 230056 back-of-module RTD see 810297 RTD Kit and 230056 Back-of-Module RTD.
Installation Instructions
- For best adhesion, ensure PV module surface temperature between 21 C and 38 C
- Mount RTD assembly cable to PV module and mounting structure and provide cable strain relief with zip ties, tape, or other means
- Clean PV module mounting area with isopropyl alcohol wipe included in 810297 installation kit
- Peel liner on RTD probe disc adhesive layer
- Stick RTD probe disc to PV module and hold with firm pressure for 15 seconds
- Connect M8 cable to RDE
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article